Description
Additional information
Downloads
Scope of supply | |
Pressure housing: | VITROVEX 13” instrument sphere, 7.000m or 12.000m depth rating |
Battery: | High-Performance Li-Ion rechargeable PowerPack with “SubConn®” BH6F power output port inclusive dummy plug and DLSBM and DLSBF |
Battery charger: | Automatic high-power Li-Ion battery charger with micro-controller and “SubConn®” BH5M charge port incl. dummy plug and DLSBM and DLSBF |
Options | |
BMS: | Battery Management System (voltages, current, temperature, SOC, diagnostic) with data acquisition and interface, incl. 24 Bit high-res data acquisition, RS-232 or RS-485 interface (other on request) and configurable NMEA-0183 (simple ASCII) data protocol.
Connection and communication with Battery Module by “SubConn®” BH10F management port inclusive dummy plug and DLSBM and DLSBF |
Remote On/Off: | To switch Battery Module or just BMS electronic on or off. Low-resistance and low-power dissipation for best performance. |
High-current output: | 20A or 30A, High current is for peak or short time only. Current must be limited between 10A to 20A max. continuously. |
OceanView®: | configuration software for BMS |
Recommended temperature conditions | Operating -20°C to +60°C
Charging +10°C to +45°C Storage -20°C to +50°C |
The arrangement of batteries can be in three layers with three different configurations each.
Weight in air: | 15kg / 25.5kg / 31.5kg |
Weight of Batteries: | 6,5kg / 17kg / 23.5kg |
Rated Voltage: | 14.4V / 25.2V / 50.2V |
Rated Capacity: | 27Ah to 365 Ah |
Rated Power: | 1350 Wh to 5258 Wh |
Level 1: | ||||
Rated Voltage: |
|
|||
Rated Capacity: |
|
|||
Rated Power: |
|
|||
Weight of Batteries: |
|
|||
Total weight in air: |
|
Level 1+2: | ||||
Rated Voltage: |
|
|||
Rated Capacity: |
|
|||
Rated Power: |
|
|||
Weight of Batteries: |
|
|||
Total weight in air: |
|
Level 1+2+3: | ||||
Rated Voltage: |
|
|||
Rated Capacity: |
|
|||
Rated Power: |
|
|||
Weight of Batteries: |
|
|||
Total weight in air: |
|